Refill Cartridge for Canon

Refill Cartridge for Canon PG -40/830

1. Open label / sticker cartridge.

2. Enlarge the filling hole at the place of ink.

3. Fill ink into the cartridge in accordance with its capacity, using syringes and needles, on the hole.

4. After the ink charging process is complete vacuum of air inside the cartridge so that ink does not flood the print head.

5. Make sure the ink came out perfect on the print head cartridge is attached to the soft paper

6. Perform a test print,Vacuum mode is as follows:Take the former empty ink cartridge and the needle then input into the hole on the cartridge until approximately 5 mm foam and then do a vacuum (suction air and excess ink)

Refill Cartridge for Canon PG -41/831

1. Open label / sticker cartridge.

2. Enlarge the hole in place of ink filling with cutter or drill 3 mm.

3. Fill ink into the cartridge in accordance with the capacity and place of each line drawing instructions, using a syringe and needle, in the hole.

4. After the ink charging process is complete vacuum of air inside the cartridge so that ink does not flood the print head.

5. Make sure the ink came out perfect on the print head cartridge is attached to the soft paper

6. Perform a test print,

Printer Problem Solving

There are many problems with printers, including HP, Canon, Epson, etc..
There are times when a printer problem we can handle in a simple but there are also forced to be brought into the service.
For example,
Hp Printer blinking will not print!
The trick is quite simple,
1. Turn on the printer and open the lid
2 Remove all cartridges ..
3. Clean the cartridge and the cartridge holding a tissue slightly moistened with alcohol 70%
4. Then attach one of the first if not blinking means the good and try to print.
5. And for the other cartridge when installed flashing means -> broken.

Well before it was decided to be brought into the service may be asked here
With pleasure we will help you in overcoming the problematic printer, please

To be continued next time ...