CANON MP160 and MP145
Reset Waste Ink Counter
1. Turn Off the printer (power cable still plug),
2. Press and Hold ON/Off and than press STOP / reset 2x.
3. Release both buttons and printer will step into the SERVICE MODE
4. Printer will be charging
5. After printer finish the charging, press STOP/reset 4x
6. Each times STOP/reset pressed, lamp ON/Off will turn green to orange
7. Off the printer and unplug the cable power
8. Turn On the printer.
i have a cannon MP145, i have error E27
ReplyDeleteto go in reset i have TO (printer is off) press hold on/off (turn on printer) and then press stop/reset 3x
I get the zero. but when i press stop/reset 4x nothing happens, no light change.
but if i press '+' display changes from 0 1 2 3 4 5 to 6 and lights also alternate.
but i cant solve the E27. Help ...
In a particular case was reset error 27 can not walk. Try performing the reset by replacing good cartridge used or attempted to remove the two cartridges.
ReplyDelete