Monday, July 19, 2010

Printer Canon Pixma MP258 – Error P08

First time, I found the problem Canon Pixma MP258 printer will not print from the cpu or the Copy Scan and P08 are the error messages on the printer panel. I could maybe try to reset, e turned out to be, then I created to copy directly, it was also error.
I've lost both cartridges, the ink was discharged, directly, I refill the black  and a color cartridge. Then I do a test print and the result is smooth and good wow.

If this error P08 does not clear, please 
Follow the instructions step by step

1. Turn off printer, cable power still plug in,
2. Press Stop/Reset button  don't release
3. Press Power Button don't release and than release Stop/Reset button
4. Press Stop/Reset button 2X and than release Power Button, wait until service mode to " 0 "
5. Turn off printer, cable power still plug in
6. Press Stop/Reset button  don't release
7. Press Power Button don't release and than release Stop/Reset button
8. Press Stop/Reset button 4X and than release Power Button, wait until service mode to " 1 "
9. Turn off printer, and loose cable power, wait one minute.
10. Connect cable power, turn on printer again, now this printer ready to use.



Operation Panel
(1) ON button / Power lamp
Turns the power on or off. Before turning on the power, make sure that the Document Cover is closed.
(2) LED (Light Emitting Diode)
Displays the number of copies, Maintenance code, or operational status such as an error code.
(3) [+] button
Specifies the number of copies.
(4) Ink lamps
Light or flash orange when ink runs out, etc. The lamp on the left indicates the Color FINE Cartridge status and the lamp on the right indicates the Black FINE Cartridge status.
(5) Paper button
Selects the page size and media type.
(6) SCAN button
Starts scanning the original to save it on the computer.
(7) Stop/Reset button
Cancels operations. You can also press this button to cancel a print, copy, or scan job in progress.
(8) Color button*
Starts color copying. You can also press this button to finalize your selection for the setting item.
(9) Black button*
Starts black & white copying. You can also press this button to finalize your selection for the setting item.
(10) Fit to Page button / Fit to Page lamp
Enables the Fit-to-Page copy function. You can copy the original automatically enlarged or reduced to fit the selected page size. When the Fit-to-Page copy function is disabled, you can make copies in the same size as the original.
(11)  (Maintenance) button
Specifies the Maintenance code.
(12) Paper lamp
Lights to indicate the page size and media type selected with the Paper button.
(13) Alarm lamp
Lights or flashes orange when an error occurs, such as paper-out or ink-out.
* In the software applications or manuals, the Black and Color buttons are collectively called the "Start" or "OK" button.

60 comments:

  1. I am not an expert but I can say that you should see the compatibility of your printer.

    ReplyDelete
  2. Thank you it work well.....................

    ReplyDelete
  3. my connon mp258 doesnt print and scan properly. it has multiple letters result while printing and scanning

    ReplyDelete
  4. cause is over refill ink, at film ribbon so dirty and sensor on the head cartridge, try cleaning with a soft paper/tissue + alcohol

    ReplyDelete
  5. Yehuuu... TQVM.. It's worked!!

    ReplyDelete
  6. Thank you !
    i love Hanan Techno website.....

    ReplyDelete
  7. Thanks its worked dude.. My printer is working fine now. thx

    ReplyDelete
  8. It Worked with an canon mp250 now it prints and scans but no one has explained what means that error code?

    ReplyDelete
  9. The error message of P,8,0 refers to the waste ink absorber within the
    printer. The waste ink absorber is a part inside the printer that
    absorbs excess ink used in the cleaning and printing operations.

    Printing can be performed until the waste ink absorber becomes full.
    When the message changes to indicate that the waste ink absorber is
    full, printing cannot be performed and the printer may need to be
    serviced. Try resetting the unit. Please try resetting the printer per
    the following instructions:

    ReplyDelete
  10. hey How come I did not see the service mode to 0? where to look for it? I am at step 4 but no number 0 display anywhere at my printer. How? Can anyone help me?

    ReplyDelete
  11. yup.. it's settle my problem..
    thx^^

    ReplyDelete
  12. Thank you!!it worked!!

    ReplyDelete
  13. i agree with all above comments... hanan is great.. its works!!!!

    ReplyDelete
  14. work done thank you so much >.<

    ReplyDelete
  15. Very useful and helpful. Worked perfectly fine.
    Thanks,

    ReplyDelete
  16. thaks, i love this post !! :D

    ReplyDelete
  17. Thanks, i love this post!

    :D

    ReplyDelete
  18. yes! its works! thanx!

    ReplyDelete
  19. hi, i do it already but still cannot work... any other solution?... thankz

    ReplyDelete
  20. For shengwee
    please, explain what the problem is displayed on a monitor or your printer?

    ReplyDelete
  21. thankyou a lot ~
    it's work !!!!!!!!!!!!!!!!
    HAPPY NEW YEAR :)

    ReplyDelete
  22. It works. Thank you very much. Really appreciate this post. Very helpful.

    ReplyDelete
  23. everything went smooth. but my printer isn't printing. the catridge is new(color) and half used(black).
    the printing takes place. could hear sounds. but no print.

    ReplyDelete
  24. Try to open the lid printer take a black cartridge and tape cartridge in nosle tissue, which have lower side, that means it wipes it clean clogged cartridge

    ReplyDelete
  25. works perfectly, tqvm..u save my day!

    ReplyDelete
  26. oh my god my printer broke what the hell. it won't turn on anymore ;_;

    ReplyDelete
  27. I follow ur step and now I can't even turn on my printer...y???

    ReplyDelete
    Replies
    1. Please explain in detail, how the initial problem?

      Delete
    2. dok saboh la g2..sugguh pon..kite wat molek2 ade nih..

      Delete
  28. i hv the same problem with nursaadah..when i follow all the above step, my printer suddenly won't turn on. how to fix the problem? please...i really need ur help.

    ReplyDelete
  29. This usually occurs because the procedure is less precise.
    Do not worry for this, just unplug the power cord and let stand for 5-15 minutes and turn it on again.

    ReplyDelete
  30. Lepas sy ikut cara ni, printer sy trus xleh on... Knp ek? Sblm ni ikut cara ni ok je...dah x kluar lmpu lg dah...huhu cdehnyer...

    ReplyDelete
  31. thankkk you,, your method has worked for me

    ReplyDelete
  32. it work.......... u da best

    ReplyDelete
  33. It doesn't work....

    ReplyDelete
  34. It really works thanks for the solution.... !! ur best

    ReplyDelete
  35. Super! It worked great--thank you!

    ReplyDelete
  36. kenape tak mau jugak????

    ReplyDelete
    Replies
    1. Apakah, Cartridge hitam dan colour harus dalam keadaan penuh?
      Dan lanjutkan step by step bila belum juga normal kembali.
      Terima kasih.

      Delete
  37. after following ur steps ,now my printer is not getting "on".
    what to do now ?,tell!!!

    ReplyDelete
    Replies
    1. This usually occurs because the procedure is less precise.
      Don't worry, just unplug the power cord and let stand for 5-15 minutes and turn it on again.

      Delete
  38. thanks men you all worked great ;;;AAAAAA;;;

    ReplyDelete
  39. da follow cara ni dengan betul, pas 2 memang boleh on balik. tapi bila cuba copy black color, kertas akan berhenti setengah jalan dan error code p08 kuar balik.. da try 2 kali tapi benda yang sama berlaku. ade solution lain??thanks

    ReplyDelete
    Replies
    1. Coba di cek bagian mekanis yang berhubungan dengan sensor kertas.

      Delete
  40. Hello, i've got the P08 error, and I follow until the 4th step, but the service mode arent turning 0. what should i do?

    ReplyDelete
    Replies
    1. Are two refill cartridges already?.
      If that can not be "0" service mode
      Remove all cartridges and do the step from the beginning.

      Delete
  41. Thanks It is working

    ReplyDelete
  42. Thank you. Might just fail my A levels without this.

    ReplyDelete
  43. thank you it works ^^

    ReplyDelete
  44. thank you very much.......it works

    ReplyDelete
  45. thanks man!!!!!!!!!!!!!!!!

    ReplyDelete
  46. cara ini berkesan or tidak untuk canon pixma mg3170?

    ReplyDelete

SPONSOR

Konten Seluler

ttp_host')>